150,000 lbs. distributed over 20', 130,000 lbs. distributed over 12'
Length
53' overall length
Width
10'8" frame width, 10' 6" at tires
Height
46" deck height
Weight
Approximately 33,000 lbs. (15,000 kgs)
Mainframe Specifications
Running Gear Specifications
Suspension
Patented Peerless, 90,000 lbs. capacity fabricated air ride suspension complete with dump valve and suspension pressure gauges mounted in sealed box
Axles (6)
Ingersol F22, 38" track axles with 16 1/2" x 7" S-Cam brakes (rated 22,500 lbs. per axle) type 20 brake chambers, grease hubs and steel hub caps
Hubs (12)
20" x 6 spoke hubs complete with cast brake drums
Wheels (24)
Tubeless rims, 7.5 x 22.5 pre-painted white
Tires (24)
275/70R22.5 Michelin XTY-2, 18 Ply
Features
Pickup Nose
Heavy duty pickup nose complete with tail chain anchors
Nose Rollers (4)
Cast 7" rollers mounted in front nose forming behind pickup nose, located for 64" and 68" centers
Pin Pockets
1-5/8" I.D. heavy duty pin pockets mounted in standard locations
Tow Lugs (4)
Installed in front of suspension and ahead of landing legs
Decking
2 1/2" dressed Fir 1/4" above main rails, rough side up. 3/8" steel plate over outside tires
Landing Legs
Heavy duty, telescopic fold up landing legs
Rear Roll
10" heavy duty full width roll set 1" above decking and 3 sets of support rollers
Center Roll (0)
6" air lift roll mounted between main rails for assistance unloading narrow skid. See options for location from rear roll and quantity
Outer Roll (0)
Pair of 8" air lift roll mounted between inner and outer rail for assistance in unloading skids with rail widths between 6'3" and 9'2". See options for locations from rear roll and quantity
Tie Downs
Tie down brackets on 16" spacing
Booster Provision
Provision for tandem axle air booster complete with air and electrical connections
Hostler Valve
Brake release valve installed in sealed box
Grease Manifold
Remote grease lines for brake suspension components mounted on suspension pedestals
Cross Chain
Brackets in rear bumper for cross chaining
Strobe Lamps
Truck-lite L.E.D. strobe lamps mounted in rear light box assembly
Swing Out Lights
Front and rear of main deck complete with chain links and flag pockets
Mud flaps
24" black rubber mudflaps at rear of trailer and ahead of mid-ship rolls and control boxes. Full width rubber belting located ahead of suspension area
System Specifications
Air
CMVSS approved
Electrical
CMVSS approved with Truck-Lite LED seal beam tail and clearance lights
Finish
Paint
Cleaned, sandblasted, primed and painted one colour
